Drenagem e reabastecimento do fluido da transmissão

Automatic Transmission/Transaxle – Vehicles With: 307-01-11 307-01-11 6-Speed Automatic Transaxle - 6R80 GENERAL PROCEDURES transmission fluid level must be at the upper level of the crosshatch mark. E129428 12. NOTE: If the transmission fluid is not at the correct level, follow the steps for Adding Additional Transmission Fluid or Removing Transmission Fluid in this procedure. Install the transmission fluid fill plug. ‡ Tighten to 35 Nm Adding additional transmission fluid 1. NOTE: To get an accurate transmission fluid level reading the engine should be idling (600-750 rpm) in PARK. Install the Transmission Fluid Fill Tube into the transmission fluid fill hole. 307-570 E129421 2. Fill the Transporter Fluid Evacuator/Injector with approximately 0.47L (1 pt) of transmission fluid. 307-D465 E129422 3. Hang the Transporter Fluid Evacuator/Injector under the vehicle, upright and close to the transmission. 307-D465 E129423 4. Connect the Transporter Fluid Evacuator/Injector and Transmission Fluid Fill Tube. ‡ Connect the open end of the fluid hose from the Transporter Fluid Evacuator/Injector onto the Transmission Fluid Fill Tube from the transmission case. 307-570 307-D465 E129420