Drenagem e reabastecimento do fluido da transmissão

Automatic Transmission/Transaxle – Vehicles With: 307-01-10 307-01-10 6-Speed Automatic Transaxle - 6R80 GENERAL PROCEDURES 5. Add transmission fluid to the cold level location as shown in the illustration. E129419 6. Install the transmission fluid fill plug. ‡ Tighten to 35 Nm E128906 7. While driving the vehicle, use the scan tool to verify that the TFT has reached a temperature of 88°C (190°F). This will circulate the transmission fluid through the torque converter and the transmission fluid cooling system, eliminating any trapped air in the transmission fluid cooling system. ‡ With the engine idling (600-750 rpm) in PARK, verify that the TFT is between 80ºC-85ºC (176ºF-185ºF). 8. Remove the transmission fluid fill plug transmission fluid level indicator assembly located on the passenger side front portion of the transmission case. E128906 9. Separate the transmission fluid level indicator from the transmission fluid fill plug. E129418 10. Wipe the transmission fluid level indicator clean. Reinstall the transmission fluid level indicator only back into the transmission fluid fill plug hole to check the transmission fluid level. Repeat this until a consistent reading is established. E129425 11. Using the scan tool verify that the TFT is between 80ºC-85ºC (176ºF-185ºF). The