Materiais adicionais

501-36-40 Paint - General Information 501-36-40 DESCRIPTION AND OPERATION Application Water based underbody protection Spray viscosity Thin as necessary with distilled water Spray gun HVLP gun 1.9 mm Spray pressure 2.0 - 3.0 bar Layer thickness 40 - 50 µm Drying approx. 2 hours at 20°C approx. 30 minutes at 60°C Short wavelength infrared approx. 8 minutes Medium wavelength infrared approx. 10 - 15 minutes Paint additives Application Sanding test color Use To test sanding results Spray gun HVLP 1.7 - 1.9 mm Spray pressure 2.0 bar Layer thickness Spray drifted Application Fixer additive Use Converts solid top coat into two layer solid; multi- color painting Spray viscosity 18 - 20 secs at 20°C Spray gun HVLP 1.2 - 1.3 mm Spray pressure 2.0 - 3.0 bar Layer thickness max. 30 µm Coat application Wet on wet Ventilation time approx. 15 - 30 minutes Maintain maximum layer thickness without fail. Must always next be overpainted with clear lacquer. Application Drying accelerator Use Accelerates drying with only minimal reduction in working life Working life approx. 5 hours at 20°C Application Drying accelerator Spray gun HVLP 1.2 - 1.3 mm Spray pressure 2.0 bar Layer thickness 50 - 70 µm Drying approx. 6 hours at 20°C approx. 25 minutes at 60°C Short wavelength infrared approx. 8 minutes Medium wavelength infrared approx. 10 - 15 minutes Cannot be used in all paints, read the manufacturer's instructions. Particularly suitable for partial painting. Application Elastifier additive in primer material Use Elastifies the complete paint structure on plastics. Addition Up to 25% Spray gun HVLP 1.7 - 1.9 mm Spray pressure 2.0 - 3.0 bar Layer thickness 50 µm Drying approx. 4 hours at 20°C approx. 40 minutes at 60°C Short wavelength infrared approx. 8 minutes Medium wavelength infrared approx. 10 - 15 minutes Application Elastifier additive in top coat Use Elastifies the complete paint structure on plastics. Addition Up to 25% Spray gun HVLP 1.7 - 1.9 mm Spray pressure 2.0 - 3.0 bar Layer thickness 50 - 60 µm