Materiais adicionais

501-36-39 Paint - General Information 501-36-39 DESCRIPTION AND OPERATION Additional Materials The manufacturer's instructions must always be followed when dealing with any materials! The information given in the following text is data which is independent of the manufacturer, and it should only used as an indication. Adhesive sealants Adhesive sealants are permanently elastic, long-lived, can be painted and accept filler. Application: Sealing of visible and normal seams. Can be over-painted with 2-component paint, primer and fillers after having dried throughout. Contamination can be removed using cleaner and thinner. 1-component PUR adhesive sealant Note: ‡ Hardens using oxygen from the air. For that reason, it must only be stripped after it has completely dried through. 2-component MS polymer adhesive sealant 2-component MS polymer adhesive sealant is free of isocyanate, solvent and silicones and can be spot-welded. MS polymer adhesive sealant Can be over painted with water-based paints. Suitable for spraying and brushing to obtain a composition true to the original. MS polymer adhesive sealant is free of isocyanate, solvent and silicones and can be spot-welded. Underbody protection Underbody protection products are immune to abrasion, permanently elastic, adhere well and are suitable for a true to original texture. Underbody protection based on solvent Application: ‡ Underbody protection for visible areas. Properties: ‡ Can be over-painted, also with 2-component paint. ‡ Can be colored with a proportion of up to 40% paint. Note: ‡ Contamination can be removed using cleaner and thinner. Water based underbody protection Can be over-painted with water based paint. Can be colored with water based paint. Contamination can be removed using water. Application Water based underbody protection Use Underbody protection for visible areas Spray viscosity ready to use Spray gun Suction beaker HVLP gun 3 - 4 mm Spray pressure 4 - 6 bar Layer thickness 500 - 1000 µm Drying approx. 6 hours at 20°C approx. 45 - 60 minutes at 60°C Short wavelength infrared approx. 8 minutes Medium wavelength infrared approx. 10 - 15 minutes Application Water based underbody protection Use Isolation primer for peroxide marks, bloomed old paintwork and thermo- plastics.