Sobre este manual

General Information 100-00-4 100-00-4 DESCRIPTION AND OPERATION 1 2 3 4 5 6 7 8 9 10 TIE42918 Item Designation 1 Special tool A special tool is required for this component. There will also be a removal or installation symbol alongside the special 2 Install new component Discard the old component and install a new component. 3 Inspect 4 Apply sealant Apply sealant to the component as specified in the materials 5 Apply petroleum jelly Apply petroleum jelly to the component as specified in the 6 Apply oil Apply oil to the component as specified in the materials 7 Apply fluid Apply fluid to the component as specified in the materials 8 Apply grease Apply grease to the component as specified in the materials Removal or Disassembly Go to the removal or disassembly detail for additional detail information to remove or disassemble a component 10 Installation or Assembly Go to the installation or assembly detail for additional detail Special Tools and Torque Figures Any requirement for special tools will picture the tool, showing it in use and with its tool number shown. Torque settings will be given at the relevant point in the procedure. Description tool symbol. Check the component for damage. table. materials table. table. table. table. information to install or assemble a component 59 Nm 23-045 TIA2301151