Bomba d'água

Engine Cooling 303-03C-10 303-03C-10 REMOVAL AND INSTALLATION Coolant Pump(24 404 0) Removal NOTE: Removal steps in this procedure may contain installation details. 1. Drain the cooling system. Refer to: Cooling System Draining, Filling and Bleeding (303-03 Engine Cooling, General Procedures). 2. Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation). 3. Loosen: 3 turn(s) x3 E129498 4. Refer to: Accessory Drive Belt (303-05 Accessory Drive - 2.5L Duratec-HE (122kW/165PS) - MI4, Removal and Installation). 5. Torque: 20 Nm x3 E129499 6. NOTE: Make sure that the mating faces are clean and free of foreign material. Torque: 10 Nm x3 E129578 Installation 1. NOTE: Install all the bolts finger tight before final tightening. To install, reverse the removal procedure. 2. Bleed the cooling system. Refer to: Cooling System Draining, Filling and Bleeding (303-03 Engine Cooling, General Procedures).