Drenagem, enchimento e sangria do sistema de arrefecimento – 2.2L
Cooling System Draining, Filling and Bleeding – 2.2L
Texto da página
Link desta página: https://ranger.mbrace.com.br/oficina/697
Imagem: https://ranger.mbrace.com.br/img/oficina/697.webp
Engine Cooling – 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L
303-03A-6
303-03A-6
Duratorq-TDCi (96kW/130PS) - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma
GENERAL PROCEDURES
2. Install the coolant expansion tank cap.
3. Run the engine speed to 2500 RPM and
maintain it for approximately 15 minutes.
4. Run the engine for 5minutes at idle rpm.
5. Switch the engine off.
6. Check the cooling system for leaks.
7. Refer to: Lifting (100-02 Jacking and Lifting,
Description and Operation).
8. Torque: 30 Nm
x4
E130132
9. Lower the vehicle.
10.Allow the engine to cool and maintain close to
room temperature.
11. Fill the coolant to the expansion tank max fill
line, if required.