Válvula termostática

Engine Cooling – 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L 303-03A-7 303-03A-7 Duratorq-TDCi (96kW/130PS) - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma REMOVAL AND INSTALLATION Thermostat(24 454 0) Removal NOTE: Removal steps in this procedure may contain installation details. 1. Drain the cooling system. Refer to: Cooling System Draining, Filling and Bleeding - 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L Duratorq-TDCi (96kW/130PS) - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma/3.2L Duratorq-TDCi (148kW/200PS) - Puma (303-03 Engine Cooling - 3.2L Duratorq-TDCi (148kW/200PS) - Puma, General Procedures). 2. Torque: 10 Nm x3 E129919 3. E129920 Installation 1. NOTE: Inspect the thermostat housing cover O-ring seal. Install a new O-ring seal if necessary. To install, reverse the removal procedure. 2. Bleed the cooling system. Refer to: Cooling System Draining, Filling and Bleeding - 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L Duratorq-TDCi (96kW/130PS) - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma/3.2L Duratorq-TDCi (148kW/200PS) - Puma (303-03 Engine Cooling - 3.2L Duratorq-TDCi (148kW/200PS) - Puma, General Procedures).