Drenagem, enchimento e sangria do sistema de arrefecimento – 2.2L

Engine Cooling – 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L 303-03A-5 303-03A-5 Duratorq-TDCi (96kW/130PS) - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma GENERAL PROCEDURES Cooling System Draining, Filling and Bleeding – 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L Duratorq-TDCi (96kW/130PS) - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma/3.2L Duratorq-TDCi (148kW/200PS) - Puma(24 122 0) Draining WARNING: When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth. 1. Release the cooling system pressure by slowly turning the coolant expansion tank cap between 2 and 3 turns. x3 E139585 2. E139584 3. Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation). 4. x4 E130132 5. Remove the radiator drain plug and drain the coolant. E139586 6. Install the radiator drain plug. 7. Lower the vehicle. Filling 1. Refill the coolant to the expansion tank to maximum line (+15mm). Bleeding CAUTION: The fluid level must remain between the MAX and MIN marks. 1. Run the engine for 5 minutes at idle rpm.