Motor

303-01C-95 Engine – 3.2L Duratorq-TDCi (148kW/200PS) - Puma 303-01C-95 ASSEMBLY 21.NOTE: New crankshaft rear seal carriers are supplied with an alignment sleeve which must be removed after installation. Torque: 20 Nm 2 4 6 7 3 1 8 5 E131395 22.NOTE: Make sure that the flywheel is in full contact with the crankshaft flange before installing the flywheel bolts. Initially hand tighten the fasteners. x8 E131396 23.Special Tool(s): 303-254 Torque: ‡ Stage 1: 15 Nm ‡ Stage 2: 30 Nm ‡ Stage 3: 75 Nm 3 5 7 2 1 8 4 6 303-254 E131397 24.Special Tool(s): 205-069, 205-070 205-070 205-069 TIE0034799 25.NOTE: Do not fully tighten the crankshaft position sensor bracket retaining bolts at this stage. x2 E87418