Motor

Engine – 3.2L Duratorq-TDCi (148kW/200PS) - Puma 303-01C-94 303-01C-94 ASSEMBLY installed. Failure to follow this instruction may result in damage to the vehicle. ‡ Clean the area on the engine before installing a new crankshaft rear seal carrier. ‡ Check the two foam pads are located as shown on the ladder frame gasket. E58864 18.Material: Engine Oil - 5W-30 (WSS-M2C913-C) engine oil E131398 19.NOTE: Install the new crankshaft rear seal carrier within five minutes of applying the recommended sealant. Material: Silicone Sealant LB (WSE-M4G323-A4 / 2U7J-M4G323-AA) sealant 3mm E131393 20. CAUTION: A new crankshaft rear seal carrier is supplied with an alignment sleeve that must not be removed until the crankshaft rear seal is fully installed. Failure to follow this instruction may result in damage to the vehicle. Initially hand tighten the fasteners. 2 4 6 7 3 1 8 5 E131394