Motor

Engine – 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L Duratorq-TDCi (96kW/130PS) 303-01B-101 303-01B-101 - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma ASSEMBLY NOTE: Initially hand tighten the fasteners. 2 4 6 7 3 1 8 5 E131394 21.NOTE: New crankshaft seal carriers are supplied with an alignment sleeve which must be removed after installation. Torque: 20 Nm 2 4 6 7 3 1 8 5 E131395 22.NOTE: Make sure that flywheel is in full contact with flywheel flange before installing the flywheel bolts. NOTE: Only tighten the bolts finger tight at this stage. x8 E131396 23. CAUTION: Make sure that the flywheel is in full contact with the crankshaft flange before installing the flywheel bolts. Special Tool(s): 303-254 Torque: ‡ Stage 1: 15 Nm ‡ Stage 2: 30 Nm ‡ Stage 3: 75 Nm ‡ Stage 4: 45° 3 5 7 2 1 8 6 4 303-254 E131397