Motor

Engine – 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L Duratorq-TDCi (96kW/130PS) 303-01B-100 303-01B-100 - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma ASSEMBLY 16. E76144 17.NOTE: A new crankshaft rear seal carrier is supplied with an alignment sleeve that must not be removed until the crankshaft rear seal is fully installed. Failure to follow this instruction may result in damage to the vehicle. ‡ Clean the area on the engine before installing a new crankshaft rear seal carrier. ‡ Check the two foam pads are located as shown on the ladder frame gasket. E58864 18. E131398 19.NOTE: Install new crankshaft rear seal carrier with in five minutes after applying the recomended sealent. Material: Silicone Sealant LB (WSE-M4G323-A4 / 2U7J-M4G323-AA) sealant 3mm E131393 20. CAUTION: A new crankshaft rear seal carrier is supplied with an alignment sleeve that must not be removed until the crankshaft rear seal is fully installed. Failure to follow this instruction may result in damage to the vehicle.