Motor

Engine – 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L Duratorq-TDCi (96kW/130PS) 303-01B- 303-01B- - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma ASSEMBLY 10.The ladder frame and the cylinder block must be aligned so that the rear clearance does not exceed 0.01 mm overlap to 0.2 mm gap. General Equipment: Round-Ended Steel Rule E76155 11. Torque: 23 Nm 19 12 8 11 22 7 3 2 6 14 18 15 9 4 1 5 10 16 17 13 20 21 E73643 12.NOTE: Only tighten the bolts finger tight at this stage. x6 E138437 13.Take a reference measurement from the front face of the crankshaft sprocket. Special Tool(s): 205-044, 205-069 205-069 205-044 E87421 14.Take measurements at two different points on the oil pump sprocket and align the oil pump sprocket. Special Tool(s): 205-044, 205-069 205-044 205-069 E87422 15.Torque: 10 Nm x6 E138437