Motor

303-01A-96 Engine – 2.5L Duratec-HE (122kW/165PS) - MI4 303-01A-96 ASSEMBLY 46.Install a new head gasket. A0087577 47. CAUTION: Make sure that new bolts are installed. NOTE: The cylinder head bolts are torque-to-yield and must not be reused. NOTE: Lubricate the bolts with clean engine oil prior to installation. Torque: ‡ Stage 1: 5 Nm ‡ Stage 2: 15 Nm ‡ Stage 3: 45 Nm ‡ Stage 4: Loosen: 90° ‡ Stage 5: Loosen: 90° 8 4 1 5 9 7 3 2 6 10 E68060 48.NOTE: Coat the valve tappets with clean engine oil prior to installation. Install the valve tappets. 49. CAUTION: Make sure that the camshafts and camshaft bearing caps are installed in their original locations. NOTE: Lubricate the camshaft journals and bearing caps with clean engine oil. Install the camshafts approximately at valve overlap position cylinder No. 4 and tighten the camshaft bearing cap bolts one at a time until finger-tight. Material: Hypoid Oil 85W-90 (SQ-M2C9002-AA / A72SX-19K261-CA) transmission fluid Torque: ‡ Stage 1: 7 Nm ‡ Stage 2: 16 Nm 5 3 1 2 4 10 8 6 7 9 E67279 50.Install the variable camshaft timing (VCT) system oil filter and the plug in the intake camshaft thrust cap. Torque: 17 Nm E139155 51.Install the VCT solenoid and the bolt. Torque: 10 Nm E139154