Motor

Engine – 2.5L Duratec-HE (122kW/165PS) - MI4 303-01A-85 303-01A-85 ASSEMBLY Engine(21 134 8) Assembly Special Tool(s) 100-002 Holding Fixture with Dial Indicator Gauge E139373 303-1416 Tool, Crank Damper Holding E134674 303-318 Aligner/Installer, Crankshaft Front Seal 21148 303-328 Replacer, Rear Oil Seal E134675 303-462 Installer, Connecting Rod E139375 303-465 Tool, Camshaft Align Timing E134673 Special Tool(s) 303-507 Timing Peg, Crankshaft TDC PZ21210 303-D032 Compressor, Piston Ring E139376 Materials Name Specification Hypoid Oil 85W-90 SQ-M2C9002-AA / A72SX-19K261-CA Silicone Sealant LB WSE-M4G323-A4 / 2U7J-M4G323-AA 1. CAUTIONS: Do not loosen or remove the crankshaft pulley bolt without first installing the special tools as instructed in this procedure. The crankshaft pulley and the crankshaft timing sprocket are not keyed to the crankshaft. The crankshaft, the crankshaft sprocket and the pulley are fitted together by friction, using diamond washers between the flange faces on each part. For that reason, the crankshaft sprocket is also unfastened if the pulley bolt is loosened. Before any repair requiring loosening or removal of the crankshaft pulley bolt, the crankshaft and camshafts must be locked in place by the special service tools, otherwise severe engine damage may occur. During engine repair procedures, cleanliness is extremely important. All parts must be thoroughly cleaned and any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages,