Motor

303-01A-80 Engine – 2.5L Duratec-HE (122kW/165PS) - MI4 303-01A-80 DISASSEMBLY 27.Remove the bolts, oil pump pickup tube and discard the gasket. A0068893 28. 2 4 3 1 E134761 29.Rotate the crankshaft slowly clockwise until the crankshaft balance weight is up against the crankshaft TDC timing peg. Special Tool(s): 303-507 303-507 E131755 30.Mark the balancer unit front shafts on the top for reference that the balancer unit is at TDC. E134651 31.NOTE: Due to the precision interior construction of the balancer unit, it should not be disassembled. Remove the 4 bolts and the balancer unit. x4 E134652 32.Remove the Special Tool(s): 303-507 303-507 E131755 33.Before removing the pistons, inspect the top of the cylinder bores. If necessary, remove the ridge or carbon deposits from each cylinder using an abrasive pad or equivalent, following manufacturer's instructions. 34.NOTE: Clearly mark the connecting rods, connecting rod caps and connecting rod