Motor

Engine – 2.5L Duratec-HE (122kW/165PS) - MI4 303-01A-79 303-01A-79 DISASSEMBLY NOTE: Mark the location and orientation of each camshaft bearing cap. 5 3 1 2 4 10 8 6 7 9 E67279 21.NOTE: If the camshafts and valve tappets are to be reused, mark the location of the valve tappets to make sure they are assembled in their original positions. NOTE: The number on the valve tappets only reflects the digits that follow the decimal. For example, a tappet with the number 0.650 has the thickness of 3.650 mm. Remove and inspect the valve tappets. 22.Discard the cylinder head bolts. 3 7 10 6 2 4 8 9 5 1 E68059 23.Support the cylinder head on a bench with the head gasket side up. Check the cylinder head distortion and the cylinder block distortion. Refer to: Cylinder Head Distortion (303-00 Engine System - General Information, General Procedures). Refer to: Cylinder Block Distortion (303-00 Engine System - General Information, General Procedures). 24.Remove the cylinder head alignment dowels. A0032441 25.Special Tool(s): 303-428 1 303-428 x11 2 E131998 26. 2 4 5 6 3 1 E65890