Sangria do sistema de direção hidráulica

Steering System - General Information 211-00-6 211-00-6 GENERAL PROCEDURES 28.Install the Vacuum Pump Kit. Apply and maintain the maximum vacuum of 68-85 kPa (20-25 in-Hg). Special Tool(s): 416-D001 211-265 416-D001 E130717 29. CAUTION: Do not hold the steering wheel against the stops for more than 5 seconds. Damage to the power steering pump may occur. Cycle the steering wheel fully from stop-to-stop 10 times. 30.Stop the engine, release the vacuum and remove the Vacuum Pump Kit. 31.NOTE: Do not overfill the reservoir. Fill the power steering fluid reservoir to the MAX mark with the appropriate power steering fluid. 32. CAUTION: Do not hold the steering wheel against the stops for more than 5 seconds. Damage to the power steering pump may occur. NOTE: The points where fluid leakage may occur are indicated in the figure. Visually inspect the power steering system for leaks. Start the engine and let it idle, turn the steering wheel from lock to lock. If excessive noise is apparent, repeat the power steering bleeding procedure. E131704