Abastecimento do sistema de direção hidráulica

Steering System - General Information 211-00-7 211-00-7 GENERAL PROCEDURES Power Steering System Filling Special Tool(s) 416-D001 Hand Vacuum Pump/Pressure Pump 23036A Activation NOTE: When filling the power steering fluid reservoir, make sure that the power steering fluid is clean and not agitated prior to use. The power steering fluid should be poured slowly into the reservoir to minimize the possibility of aeration. 33. E130730 34.NOTE: Make sure that the power steering fluid in the power steering fluid reservoir does not fall below the MIN mark, as air could enter the system. Fill the reservoir as needed with the specified fluid. 35.Raise and support the vehicle making sure that the road wheels are just clear of the floor. Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation). 36.Special Tool(s): 416-D001 211-265 416-D001 E130717 37.Using the Vacuum Pump Kit, apply vacuum and maintain the maximum vacuum of 68-85 kPa (20-25 in-Hg). 38.If the vacuum decreases by more than 5cm-Hg in 5 minutes,check the power steering system for leaks . 39.Remove the Power Steering Evacuation Cap and Vacuum Pump Kit. 40.NOTE: Do not overfill the reservoir. Fill the power steering fluid reservoir to the MAX mark with the appropriate power steering fluid.