Unidade de controle hidráulico (HCU) – RHD 4WD/RHD RWD

Anti-Lock Control 206-09A-6 206-09A-6 REMOVAL AND INSTALLATION Hydraulic Control Unit (HCU) – RHD 4WD/RHD RWD Removal NOTE: Removal steps in this procedure may contain installation details. 1. Refer to: Brake System Health and Safety Precautions (100-00 General Information, Description and Operation). 2. E129507 3. 1. Connect one end of a suitable piece of clear plastic pipe to the brake caliper bleed nipple and place the other end into a suitable container. 2. Loosen the bleed nipple. 3. Depress the brake pedal until all the brake fluid is drained from the brake fluid reservoir. 4. Tighten the bleed nipple. 5. Repeat the draining procedure on the opposite side brake caliper and rear brake wheel cylinder. 4. x10 x10 E130153