Braço superior

Front Suspension 204-01-18 204-01-18 REMOVAL AND INSTALLATION Upper Arm Special Tool(s) / General Equipment 204-288A Remover/Installer, Ball Joint E115081 Removal CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. A new part with the same part number or an equivalent part must be installed, if installation is necessary. Do not use a part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts. NOTE: Removal steps in this procedure may contain installation details. Special Tool(s) / General Equipment Two Leg Puller 1. Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation). Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation). 2. Refer to: Front Wheel Speed Sensor (206-09 Anti-Lock Control, Removal and Installation). 3. Torque: 70 Nm E126001 4. CAUTIONS: Do not use a hammer to separate the ball joint from the wheel knuckle or damage to the wheel knuckle can result. Do not damage the ball joint boot while installing the special tool.