Amortecedor dianteiro

204-01-15 Front Suspension 204-01-15 REMOVAL AND INSTALLATION Front Shock Absorber Removal WARNING: All vehicles are equipped with gas-pressurized shock absorbers which will extend unassisted. Do not apply heat or flame to the shock absorbers during removal or component servicing. Failure to follow these instructions may result in personal injury. CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. A new part with the same part number or an equivalent part must be installed, if installation is necessary. Do not use a part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts. NOTE: Removal steps in this procedure may contain installation details. 1. Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation). Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation). 2. 1. Torque: 30 Nm 2. Torque: 250 Nm x3 1 2 E125381 3. Using a suitable jack support the lower control arm near the lower ball joint. 4. Torque: 80 Nm x2 E125382 5. Lower the jack support to lower the control arm. 6. E125444 Installation CAUTION: Before tightening any suspension bushing fasteners, use a suitable jack to raise the suspension.