Materiais adicionais

501-36-42 Paint - General Information 501-36-42 DESCRIPTION AND OPERATION Application Matting paste Short wavelength infrared approx. 8 minutes Medium wavelength infrared approx. 10 - 15 minutes Note: ‡ The paint must not be filtered. Application Anti-silicone additive Use Prevents silicone craters Addition 2% to maximum 5% Note: ‡ Only add away from the paint cabin and immediately remove contaminated cloths. ‡ If anti-silicone additive is used in the first coat, then it must be used in the following coats, and in at least the same proportions. Additive materials Variety of adhesive tapes For profile, fine and large area masking work. Properties: ‡ Withstands heat. ‡ Withstands water-based paint. ‡ Accepts paint. ‡ Easily removed without leaving adhesive residues. Masking film. For masking of large areas on vehicles. Properties: ‡ Accepts 2-component and water-based paints. ‡ Withstands heat. ‡ Withstands water spray and condensation. ‡ Withstands solvent. ‡ Easily cut. ‡ Environmentally friendly and can be recycled. Polishing materials. Polishing means microfine sanding. For this reason, polishes must only contain abrasives, and no silicones. During polishing repair, a good shine is achieved through the step-by-step use of polishes, starting with a highly abrasive polish and ending with a polish having very slight abrasive action. Polishes are available in graduations from coarse to fine. Abrasives Please refer to the "Tools" chapter for information on abrasives.