Aplicação de pintura de fábrica

501-36-13 Paint - General Information 501-36-13 DESCRIPTION AND OPERATION The structure of an original paint finish During construction of the original paint, a total surface thickness of between 120 and 130 µm is achieved. The thicknesses of the layers may vary however, because they are greater for horizontal surfaces than vertical ones. Paint layers TO BE UPDATED LATER Item Description 1 Steel panel 2 Phosphate layer 2.9 g/m×, corresponding to 2 µm. 3 Cathodic dip paint 30-35 µm 4 Filler 30-35 µm 5 Base paint 15-20 µm 6 Clear varnish 55 µm Colored fillers applied in production Filler which gives color is used in production. Its use makes the base paint and clear varnish unnecessary on certain vehicle interior surfaces (engine, doors). Not every exterior paint has its own matching filler. It is more that the tones of the filler are color compatible, i.e. they have similar intensity to the top coat. During repair painting the filler color tones must be used according to the manufacturer's instructions.