Técnicas de união

501-25-64 Body Repairs - General Information 501-25-64 DESCRIPTION AND OPERATION MIG brazes 1 E96577 Des Description FULSW ion 1 Rear side member / wheelhouse reinforce- ment 2 Apron panel reinforcement / A-pillar Metal Inert Gas (MIG) brazing is increasingly used in production for certain body areas. 2 In areas where resistance spot welding is not possible due to limited space or higher strength requirements, MIG welding was previously used. Increasingly, these MIG welded seams are being replaced by MIG brazes. The temperature range used during MIG brazing is significantly lower. This keeps the damage to the anti-corrosion zinc layer on zinc-coated panels to a minimum. This results in the following advantages of the MIG brazed seam: