Reparo do fio da grade do desembaçador

501-11-5 Glass, Frames and Mechanisms 501-11-5 GENERAL PROCEDURES Heated Window Grid Wire Repair 1. Clean the filament using isopropyl alcohol. 2. Attach tape to both sides of the filament. A6E7736W003 3. Using a small brush or marking pen, apply silver paint. 4. CAUTION: Do not operate the rear window defroster until the paint is completely dry. It may cause other malfunctions if it is used before the paint is dry. After 2–3 min, carefully remove the tape without damaging the applied area. 5. Dry the repaired part according to the following procedure. ‡ When the room temperature is 25 °C {77 °F}, leave to dry for 24 h. ‡ When a hot air blower is used, dry with air at a temperature of 150 °C {302 °F} or 30 min.