Ajuste de cambagem e cáster

Suspension System - General Information 204-00-2 204-00-2 GENERAL PROCEDURES Camber and Caster Adjustment NOTE: Make sure that the tire pressures are to specification and that the vehicle is unladen. 1. Using alignment equipment and the manufacturer's instructions, measure the front caster and camber. 2. Loosen the upper arm nut. X2 E127339 3. Loosen the lower arm bolt(s) and adjust the caster and camber settings according to manufacturer's instructions. 4. NOTE: Make sure that the weight of the vehicle is on the wheels and that the caster and camber settings are not disturbed while tightening the bolt(s). After adjustment, tighten the upper arm shaft bolt and lower arm bolts to the specified torque . 1. Tightening torque of upper arm bolt : 86 Nm . 2. Tightening torque of Lower arm bolt : 270 Nm 5. Confirm the front wheel alignment as in the specification. 1. If not within the specification, adjust the front wheel alignment again. E127342