Acessórios do motor

Engine – 3.2L Duratorq-TDCi (148kW/200PS) - Puma 303-01C-128 303-01C-128 INSTALLATION 24.NOTE: Make sure that the mounting face is clean and lubricated. E131312 25. CAUTION: Rotate the seal assembly until it locks. Failure to follow this instruction may result in damage to the seal assembly. NOTE: A new crankshaft front seal carrier is supplied with an alignment sleeve that must not be removed until the crankshaft rear seal is fully installed. Special Tool(s): 303-679A 303-679A E131365 26.Remove the alignment sleeve after the seal is fully installed. E131367 27. CAUTION: Crankshaft pulley retaining bolts must only be used three times. NOTE: Initially hand tighten the fasteners. Special Tool(s): 303-1310 Torque: ‡ Stage 1: 45 Nm ‡ Stage 2: 120°