Motor

Engine – 3.2L Duratorq-TDCi (148kW/200PS) - Puma 303-01C-92 303-01C-92 ASSEMBLY 5. NOTE: Make sure that these components are installed to the noted removal position. Material: Engine Oil - 5W-30 (WSS-M2C913-C) engine oil E94387 6. NOTE: Make sure that these components are installed to the noted removal position. NOTE: Install all the bolts finger tight before final tightening. Torque: ‡ Stage 1: 25 Nm ‡ Stage 2: 60 Nm ‡ Stage 3: 90° x10 E94118 7. E95356 8. NOTE: Only tighten the bolts finger tight at this stage. E94117 9. The ladder frame and the cylinder block must be aligned so that the side clearance does not exceed 0.05 mm overlap to 0.05 mm gap. Special Tool(s): 303-432 303-432 E76169 10.The ladder frame and the cylinder block must be aligned so that the rear clearance does not exceed 0.01 mm overlap to 0.2 mm gap. General Equipment: Round-Ended Steel Rule E76155