Retentor dianteiro do motor

Engine – 3.2L Duratorq-TDCi (148kW/200PS) - Puma 303-01C-46 303-01C-46 REMOVAL AND INSTALLATION instruction may result in damage to the seal assembly. Special Tool(s): 303-679A 303-679A E131306 Installation 1. NOTE: Make sure that the mounting face is clean and lubricated. E131312 2. CAUTION: Rotate the seal assembly until it locks. Failure to follow this instruction may result in damage to the seal assembly. NOTE: A new crankshaft front seal carrier is supplied with an alignment sleeve that must not be removed until the crankshaft rear seal is fully installed. Special Tool(s): 303-679A 303-679A E131365 3. Remove the alignment sleeve after the seal is fully installed. E131367 4. CAUTION: The crankshaft pulley bolts must not be used more than 3 times. Special Tool(s): 303-1310 Torque: ‡ Stage 1: 45 Nm ‡ Stage 2: 120°