Motor

Engine – 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L Duratorq-TDCi (96kW/130PS) 303-01B-104 303-01B-104 - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma ASSEMBLY paths. Use a plastic scraping tool to remove all traces of the head gasket. E131727 40.NOTE: Measure the piston protrusion of each cylinder at top dead center (TDC). Measure the distance between the piston crown and the cylinder block at the points indicated. E131633 41.NOTE: The largest measurement determines the choice of the cylinder head gasket. ‡ Using the special tools, measure the piston protrusion. Special Tool(s): 205-070, 205-069, 303-432 205-070 303-432 205-069 E131634 42.Determine the cylinder head gasket. Refer to: Specifications (303-01 Engine - 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L Duratorq-TDCi (96kW/130PS) - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma, Specifications). 43.NOTE: Make sure that a new component is installed. E76153