Motor

Engine – 2.5L Duratec-HE (122kW/165PS) - MI4 303-01A-93 303-01A-93 ASSEMBLY Turn the crankshaft clockwise to position the No. 1 piston at TDC. 32.NOTE: The crankshaft TDC timing peg will contact the crankshaft and prevent it from turning past TDC. However, the crankshaft can still be rotated in the counterclockwise direction. The crankshaft must remain at the TDC position until the timing drive components and crankshaft pulley are installed. Install the crankshaft TDC timing peg. Install the crankshaft TDC timing peg. Special Tool(s): 303-507 303-507 E131755 33.NOTE: Clean the oil pump and cylinder block mating surfaces with metal surface prep. Torque: ‡ Stage 1: 10 Nm ‡ Stage 2: 20 Nm 2 4 3 1 E134761 34.Install a new oil pump pickup tube gasket and the pickup tube. Torque: 10 Nm A0068893 35. CAUTION: Install the crankshaft rear seal carriers within five minutes of applying the sealer. NOTE: Do not damage the mating faces. NOTE: Mating surface should not have traces of oil to improve the adhesion. Material: Silicone Sealant LB (WSE-M4G323-A4 / 2U7J-M4G323-AA) sealant 3mm E131791