Motor

Engine – 2.5L Duratec-HE (122kW/165PS) - MI4 303-01A-89 303-01A-89 ASSEMBLY Lubricate the upper crankshaft main bearings with clean engine oil and install the 5 crankshaft main bearings in the cylinder block. x5 E97400 13.NOTE: If reusing the crankshaft main bearings, install them in their original positions and orientation as noted during disassembly. Lubricate the crankshaft main bearings with clean engine oil and install the 5 crankshaft main bearings in the main bearing beam. x5 E97402 14.Lubricate journals on the crankshaft with clean engine oil. 15.Position the crankshaft in the cylinder block. E97394 16.Lubricate the 10 main bearing beam side fit surfaces (front 2 shown) with clean engine oil. E139181 17.Lubricate the crankshaft bearing journals on the main bearing beam with clean engine oil. Then position the main bearing beam in the engine block with the main bearing beam mounted flush with the rear face of the engine block. E139182 18. CAUTION: Make sure that new bolts are installed. NOTE: Lubricate the main bearing beam bolts threads and under the bolt heads with clean engine oil. NOTE: Position the crankshaft to the rear of the cylinder block, then position the crankshaft to