Coletor de admissão

Engine – 2.5L Duratec-HE (122kW/165PS) - MI4 303-01A-48 303-01A-48 REMOVAL AND INSTALLATION Intake Manifold(21 183 0) Removal NOTE: Removal steps in this procedure may contain installation details. 1. WARNINGS: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury. Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury. Always disconnect the battery ground cable at the battery when working on an evaporative emission (EVAP) system or fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). 2. Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation). 3. Refer to: Throttle Body (303-04 Fuel Charging and Controls - 2.5L Duratec-HE (122kW/165PS) - MI4, Removal and Installation). 4. Refer to: Fuel System Pressure Release (310-00 Fuel System - General Information - 2.5L Duratec-HE (122kW/165PS) - MI4, General Procedures). 5. Torque: 10 Nm E131662