Eixos de comando

Engine – 2.5L Duratec-HE (122kW/165PS) - MI4 303-01A-27 303-01A-27 REMOVAL AND INSTALLATION Camshafts(21 284 0) Special Tool(s) / General Equipment 303-465 Tool, Camshaft Align Timing E134673 303-507 Timing Peg, Crankshaft TDC PZ21210 2 mm Punch Materials Name Specification Hypoid Oil 85W-90 SQ-M2C9002-AA / A72SX-19K261-CA Thread Locking MS WSK-M2G349-A7 / 2U7J-M2G349-AA Removal NOTE: Removal steps in this procedure may contain installation details. 1. Refer to: Accessory Drive Belt (303-05 Accessory Drive - 2.5L Duratec-HE (122kW/165PS) - MI4, Removal and Installation). 2. CAUTIONS: During engine repair procedures, cleanliness is extremely important. Any foreign material (including any material created while cleaning gasket surfaces) that enters the oil passages, coolant passages or the oil pan can cause engine failure. Do not rotate the camshafts unless instructed to in this procedure. Rotating the camshafts or crankshaft with timing components loosened or removed can cause serious damage to the valves and pistons. Refer to: Valve Cover (303-01 Engine - 2.5L Duratec-HE (122kW/165PS) - MI4, Removal and Installation). 3. WARNING: Only rotate the crankshaft clockwise. Turn the crankshaft until no. 1 piston is at about 45° before TDC. E131739 4. CAUTION: The camshaft alignment plate is for camshaft alignment only. Using this tool to prevent engine rotation can result in engine damage. NOTE: The camshaft timing slots are offset. If the camshaft alignment plate cannot be installed, rotate the crankshaft one complete revolution clockwise to correctly position the camshafts. Special Tool(s): 303-465 303-465 E134694