Folga do eixo balanceador

Engine – 2.5L Duratec-HE (122kW/165PS) - MI4 303-01A-23 303-01A-23 GENERAL PROCEDURES the thrust direction with the screwdriver, using a prying action as shown. ‡ Position the dial indicator gauge with holding fixture (1) on the Allen wrench 80 mm (3.149 in) above the driven gear shaft center (2) on the balancer unit. Special Tool(s): 100-002 ‡ Rotate the crankshaft clockwise and measure the backlash at all of the following 6 positions: 10 degrees, 30 degrees, 100 degrees, 190 degrees, 210 degrees and 280 degrees. 100-002 1 2 E134654 49.NOTE: If maximum backlash exceeds 0.101 mm (0.003 in), install a new balancer unit. ‡ Remove the balancer unit from the cylinder block. ‡ Install the selected adjustment shims on the seat faces of the balancer unit.