Regulagem da folga de válvulas

Engine – 2.5L Duratec-HE (122kW/165PS) - MI4 303-01A-16 303-01A-16 GENERAL PROCEDURES revolution clockwise to correctly position the camshafts. Special Tool(s): 303-465 303-465 E134694 9. E131754 10.Special Tool(s): 303-507 303-507 E131755 11. NOTE: Only tighten the bolt finger tight at this stage. ‡ Bolt M6 x 18 mm E131758 12. E131840 13.Reposition the camshaft alignment plate to the slot on the rear of the intake camshaft only. Special Tool(s): 303-465 303-465 E134714 14. CAUTION: Releasing the ratcheting mechanism in the timing chain tensioner allows the plunger to collapse and create slack in the timing chain. Installing an M6 x 30 mm bolt into the upper front cover timing hole will hold the tensioner arm in a retracted position