Semieixo dianteiro direito

Front Drive Halfshafts 205-04-4 205-04-4 REMOVAL AND INSTALLATION Front Halfshaft RH(14 321 0) Removal CAUTIONS: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. A new part with the same part number or an equivalent part must be installed, if installation is necessary. Do not use a part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts. Never pick up or hold the halfshaft by the inboard or outboard CV joint only. NOTE: Removal steps in this procedure may contain installation details. 1. Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation). 2. Refer to: Wheel Knuckle - 4WD (204-01 Front Suspension, Removal and Installation). 3. CAUTION: Do not damage the axle shaft oil seal, the machined sealing surface on the inboard CV joint housing or the axle shaft splines. NOTE: A ring retainer retains the inboard CV joint housing to the differential side gear in the axle. 205-291 1 2 E128866 4. E128947 Installation 1. CAUTION: Install a new retainer every time the halfshaft is removed. NOTE: Start one end of the retainer in the groove and work it over the halfshaft and into the groove to prevent the retainer from over expanding. 1. Ring retainer. 1 E128867