Funções controladas pelo módulo

419-10-8 Multifunction Electronic Modules 419-10-8 DESCRIPTION AND OPERATION The central locking is actuated if one of the following conditions is satisfied: ‡ A key is inserted into one of the door locks and turned to the "locking" position. ‡ The locking button on the remote control is pressed once. ‡ The lock/unlock button is pressed inside the vehicle. If one of the doors is not properly closed when the central locking function is performed then all doors are locked and unlocked again. The turn signal lamps will show one short flash when the vehicle has been successfully centrally locked. Locking/unlocking œ double locking The double locking system locks all doors so that they cannot be opened from outside the vehicle. In addition to the central locking function, the double locking system also disconnects the door opening levers from the locking mechanism. This means that the doors can no longer be opened from inside the vehicle. The double locking mechanism only works when the ignition key is not in the ignition lock. The double locking is activated if one of the following conditions is satisfied: ‡ A key is inserted into a door lock and turned to the "locking" position twice within 3 seconds. ‡ The locking button on the remote control is pressed twice within the space of 3 seconds (if the vehicle is configured for activation of the double locking upon a double press of the locking button on the remote control). If the ignition key has been turned to position "I" then the vehicle is centrally locked but not double-locked. If on a double-locked vehicle the corresponding ignition key is inserted into the ignition, the system switches over from double locking to central locking. The turn signal lamps will show two short flashes to confirm when the vehicle has been double locked. Locking/unlocking œ central unlocking The central unlocking system unlocks all of the doors on the vehicle including the liftgate. The central locking is actuated if one of the following conditions is satisfied: ‡ The door lock is turned to the unlocking position. ‡ The release button on the radio remote control is pressed once (provided that the vehicle is not configured to unlock the driver's door only). ‡ The release button on the radio remote control is pressed twice within 3 seconds. ‡ The door opening lever on a front door is pulled to the unlocking position on a centrally locked vehicle (provided the vehicle is not double locked). ‡ The lock/unlock button is pressed inside the vehicle, whilst a key is in the ignition or up to 10 seconds after a key has been removed from the ignition. If the vehicle has been configured for unlocking via the driver's door lock and the "unlocking" button on the remote control is only pressed once, then just the driver's door is unlocked. If the "unlocking" button on the remote control is then pressed again within 3 seconds the remaining doors are unlocked via the central unlocking function. If the vehicle was double locked beforehand, then the other doors are centrally locked, whereas the driver's door is unlocked. Unlocking of the vehicle with the ignition switched off, is confirmed by one long flash of the turn signal lamps. Locking/unlocking - automatic re-locking function The automatic re-locking function returns the locking system of the vehicle to its last status if it was centrally locked or double locked and the following conditions are satisfied: ‡ The vehicle is unlocked via remote control. ‡ A door has not been opened within 45 seconds. ‡ The ignition is not switched on. This feature may be turned off at the Ford dealer.