Transmissão – 2WD

Manual Transmission/Transaxle – Vehicles With: 5-Speed 308-03A-56 308-03A-56 Manual Transmission - MT75 INSTALLATION Transmission – 2WD Installation General Equipment Transmission Jack 1. Check the pilot bearing for damage. If damaged, install a new pilot bearing. Refer to: Pilot Bearing - 2.5L Duratec-HE (122kW/165PS) - MI4 (308-01 Clutch - Vehicles With: 5-Speed Manual Transmission - MT75, Removal and Installation). 2. NOTE: Do not apply grease to a newly installed pilot bearing. Apply approximately one gram of grease to the pilot bearing. 3. Apply a thin film of grease to the input shaft guide sleeve. 4. Shift the transmission into third gear. All vehicles 5. General Equipment: Transmission Jack Torque: 48 Nm x2 x2 x4 x4 E134602 6. Torque: 48 Nm x3 x3 E132702 7. 1. Torque: 25 Nm 2. Torque: 40 Nm 2 1 x2 x2 E134601