Transmissão

Manual Transmission/Transaxle – Vehicles With: 5-Speed 308-03A-51 308-03A-51 Manual Transmission - MT75 ASSEMBLY 38. Using the special tool, install the input shaft guide sleeve oil seal. 308-113 ELE0012612 39. Assemble the input shaft guide sleeve. 1. Install the thrust washer. 2. Install the O-ring seal. 1 2 TIE0023796 40. Coat the threads of the input shaft guide sleeve and the O-ring seal with grease 41. Using the special tool, install the input shaft guide sleeve. 250Nm 308-109 ELE0012594 42. Coat the threads of the countershaft bearing retainer and the O-ring seal with grease. 43. NOTE: Install a new countershaft bearing retainer O-ring seal. Install the countershaft bearing retainer. 24Nm ELE0012909 44. Using the special tool, loosen the bearing retainer by 80 degrees. 303-174 ELE0012910 45. NOTE: Rotate the transmission housing downwards at least 45 degrees. Adjust the countershaft. ‡ Using a suitable brass drift and a soft faced hammer, strike two blows on each of the bosses. This will seat the countershaft front bearing against the bearing retainer. ELE0012911