Transmissão

Manual Transmission/Transaxle – Vehicles With: 5-Speed 308-03A-47 308-03A-47 Manual Transmission - MT75 ASSEMBLY 11. Using the special tool, install the main selector shaft bearing. 303-173 ELE0012902 12. Assemble the countershaft to the output shaft and secure it with a cable tie. ELD1601677 13. NOTE: The first and second gear selector fork must engage in the middle of the first and second gear synchronizer unit. Assemble the main selector shaft to the countershaft and output shaft assembly. ELD1601676 14. NOTE: Make sure that the flat end of the reverse gear idler shaft is facing upwards. Assemble the reverse gear idler to the countershaft and output shaft assembly and secure it with cable ties. ELD1601679 15. NOTE: Make sure that the outtrigger of the selector fork is facing upwards. Attach the fifth and reverse gear selector fork to the lower synchronizer unit. ELD1601678 16. NOTE: During installation, guide the main selector shaft into the bearing and selector gate correctly. NOTE: Make sure that there is no touch condition between the countershaft and the synchronizer ring. NOTE: Make sure that the inside splines of the sensor ring are facing to the output shaft flange. Using the special tools, install the countershaft and output shaft assembly. 1. Install the vehicle speed sensor (VSS) ring.