1.14.4 Especificações de reboque

2 Chassis 2.1 Suspension System WARNINGS: Do not modify, drill, cut or weld any suspensioncomponents,specifically the steering gear system, subframe or anti-roll bars, springs or shock absorbers including mounting brackets. The rear leaf springs are pre-stressed in manufacture and should not be altered for rate or height in any way during vehicle conversion. Adding or removing leaves may result in failure or reducedfunctionofthespringaswell as other vehicle related issues for which Ford Motor Company can not be held responsible. CAUTIONS: Modifications to the suspension system can cause a deterioration of the vehicle handling characteristics and durability. When carrying out welding work the springs must be covered to protect them against weld splatter. Do not touch springs with welding electrodes or welding tongs. NOTE: Do not modify the wheelbase or add any type of frame extension to vehicles fitted with Electronic Stability Program ESP. NOTE: Do not damage the surface or corrosion protection of the spring during disassembly and installation. NOTE: Do not add any additional axles. FordRanger 2011.5 Date of Publication: 05/2011