Vazamentos de água

501-25-77 Body Repairs - General Information 501-25-77 DESCRIPTION AND OPERATION TO BE UPDATED LATER Des Description FULSW ion 1 Seal/adhesion 2 Clips 3 Door speaker Door weatherstrip TO BE UPDATED LATER Leaks can be caused by badly fitted seals. In particular, areas with radii -Arrow- must be thoroughly checked. Door seals can develop leaks due to: ‡ Damaged or expanded seals. ‡ Ageing. ‡ Insufficient contact pressure. ‡ Inadequate contact area for seal on body part. Fastening bolts could be loose or clips incorrectly positioned on door modules. Corrective action Depending on the door seals used, different sealing methods can be used. NOTE: The drainage holes on the underside of the door may not be blocked - if they are, clean them. Defective films and foam seals must be replaced. Once the adhesive surfaces have been cleaned, plastic films must be stuck with double-sided adhesive tape or replaced. Leaky foam seals are sealed with Butyl tape or replaced. Plastic door modules are fitted with a weatherstrip, which cannot be replaced. Seal the leaky point with Butyl tape or replace the part. ‡ Uneven welded flange thickness because of several layers of body panels or production tolerances. ‡ Kinks. The contact pressure of a seal can be determined using a strip of paper. If a strip of paper trapped in the closed door can be pulled out easily, the contact pressure is too low. To resolve