Programação do transmissor de entrada sem chave (RKE)

501-14-7 Handles, Locks, Latches and Entry Systems 501-14-7 GENERAL PROCEDURES Remote Keyless Entry (RKE) Transmitter Programming Programming 1. To programme new remote controls turn the ignition key to position II four times within six seconds. 2. Turn the ignition to position 0. A tone sounds to indicate that it is now possible to programme the remote controls for ten seconds. 3. Press any button on a new remote control. A tone will sound as confirmation. 4. Repeat this last step for all your remote controls, including your original. Do not remove the key from the ignition when pressing the button on this remote control. 5. Switch the ignition back on (position II) or wait for ten seconds without programming another remote control to end the key programming. Only the remote controls which you have just programmed are now able to lock and unlock the vehicle.