307-05 Comandos externos do câmbio automático

Automatic Transmission/Transaxle External Controls 307-05-1 307-05-1 . SECTION 307-05 Automatic Transmission/Transaxle External Controls VEHICLE APPLICATION: 2011.50 Ranger CONTENTS GENERAL PROCEDURES Selector Lever Cable Adjustment....................................................................................... REMOVAL AND INSTALLATION Selector Lever Assembly.................................................................................................... Selector Lever Cable.......................................................................................................... PAGE 307-05-2 307-05-3 307-05-4

Automatic Transmission/Transaxle External Controls 307-05-2 307-05-2 GENERAL PROCEDURES Selector Lever Cable Adjustment Adjustment 1. Shift the selector lever to the "D" (DRIVE) position. 2. Refer to: Jacking (100-02 Jacking and Lifting, Description and Operation). Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation). 3. E139749 4. Rotate the selector lever clockwise until the travel stops. Then rotate the manual lever counterclockwise 3 detents, this should be the (D) position. E139750 5. NOTE: NOTE: Ensure that the selector lever cable adjustment mechanism is locked. E139749 6. Refer to: Jacking (100-02 Jacking and Lifting, Description and Operation). Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation). 7. Start the engine and move the selector lever through all the gear positions. Wait until each gear engages when moving through the gear positions. 8. Check that the selector lever position indicator corresponds to the position of the selector lever, repeat the adjustment procedure if necessary. 9. Move the selector lever into the "P" (PARK) position and switch off the engine.

Automatic Transmission/Transaxle External Controls 307-05-3 307-05-3 REMOVAL AND INSTALLATION Selector Lever Assembly Removal 1. Refer to: Floor Console - Single Cab (501-12 Instrument Panel and Console, Removal and Installation). Refer to: Floor Console - Double Cab (501-12 Instrument Panel and Console, Removal and Installation). 2. E135202 3. Torque: 15 Nm x4 x4 E135203 Installation 1. To Install, Reverse the removal procedure.

Automatic Transmission/Transaxle External Controls 307-05-4 307-05-4 REMOVAL AND INSTALLATION Selector Lever Cable Removal 1. Refer to: Floor Console - Single Cab (501-12 Instrument Panel and Console, Removal and Installation). Refer to: Floor Console - Double Cab (501-12 Instrument Panel and Console, Removal and Installation). 2. E135202 3. Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation). 4. Torque: 25 Nm x2 E135426 Installation 1. To install, reverse the removal procedure. 2. Refer to: Selector Lever Cable Adjustment (307-05 Automatic Transmission/Transaxle External Controls, General Procedures).