Rail de combustível (flauta)

Fuel Charging and Controls – 2.2L Duratorq-TDCi (88kW/120PS) 303-04B-15 303-04B-15 - Puma/2.2L Duratorq-TDCi (96kW/130PS) - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma REMOVAL AND INSTALLATION Fuel Rail General Equipment Ford Diagnostic Equipment Removal 1. WARNINGS: Make sure that the engine is switched off. Make sure that the fuel pressure has dropped to zero and that the fuel temperature is at ambient temperature. Wait at least 1 minute after the engine has stopped before commencing any repair to the fuel injection system. CAUTION: Always carry out the cleaning process before carrying out any repairs to the fuel injection system components. NOTE: Removal steps in this procedure may contain installation details. 2. Within the datalogger function of WDS, check that the fuel pressure has dropped to zero and that the fuel temperature has either reached ambient temperature or is below 30ºC whichever is the greater. General Equipment: Ford Diagnostic Equipment 3. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). 4. Refer to: Air Cleaner - 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L Duratorq-TDCi (96kW/130PS) - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma (303-12 Intake Air Distribution and Filtering - 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L Duratorq-TDCi (96kW/130PS) - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma/3.2L Duratorq-TDCi (148kW/200PS) - Puma, Removal and Installation). 5. E129579 6. E129766 7. CAUTIONS: Make sure that the fuel line remains in contact at both ends until both unions