Acessórios do motor

Engine – 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L Duratorq-TDCi (96kW/130PS) 303-01B-139 303-01B-139 - Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma INSTALLATION 1. E131398 2. NOTE: Install the new crankshaft rear seal carrier within five minutes of applying the recommended sealant. Material: Silicone Sealant LB (WSE-M4G323-A4 / 2U7J-M4G323-AA) sealant 3mm E131393 3. CAUTION: A new crankshaft rear seal carrier is supplied with an alignment sleeve that must not be removed until the crankshaft rear seal is fully installed. Failure to follow this instruction may result in damage to the vehicle. Initially hand tighten the fasteners. 2 4 6 7 3 1 8 5 E131394 4. NOTE: New crankshaft rear seal carriers are supplied with an alignment sleeve which must be removed after installation. Torque: 10 Nm 2 4 6 7 3 1 8 5 E131395 5. NOTE: Make sure that the flywheel is in full contact with the crankshaft flange before installing the flywheel bolts.