Retentor dianteiro do virabrequim
Crankshaft Front Seal
Texto da página
Link desta página: https://ranger.mbrace.com.br/oficina/420
Imagem: https://ranger.mbrace.com.br/img/oficina/420.webp
Engine – 2.2L Duratorq-TDCi (88kW/120PS) - Puma/2.2L Duratorq-TDCi (96kW/130PS)
303-01B-18
303-01B-18
- Puma/2.2L Duratorq-TDCi (110kW/150PS) - Puma
REMOVAL AND INSTALLATION
Installation
1. NOTE: Make sure that mounting face is clean
and lubricated.
E131312
2.
CAUTION: A new crankshaft seal carrier
is supplied with an alignment sleeve that
must not be removed until the
crankshaft seal if fully installed. Failure
E133577
to follow this instruction may result in
damage to the crankshaft.
303-679
E133587
3.
E131367
4. NOTE: Initially hand tighten the fastners.
Torque:
Stage 1: 45
Nm
Stage 2: 120°
x3
X2
1
2
303-1310